-
Loaded 4X4 Standard+ Suspension Upgrade Kit: MITSUBISHI TRITON MQ/MRYes, you can upgrade your Triton's suspension without lifting it much beyond stock heights! Our Standard+ kit includes two fully assembled front struts, with Lovells or Dobinson front coils and two rear shock absorbers. The factory rear leaf springs are retained. Expect around a...
- From $1,373.00
- From $1,373.00
- Unit price
- per
-
Loaded 4X4 40mm Front Levelling Kit: MITSUBISHI TRITON MQ/MRThis levelling kit is perfect for the 4X4 owner that wants to raise the front of their 4X4 to reduce the factory stock rake and improve their vehicle's on and off-road performance. It leaves the stock rear springs in place, but swaps out the...
- From $1,373.00
- From $1,373.00
- Unit price
- per
-
Loaded 4X4 Forty20 Lift Kit - 40mm Front And 20mm Rear Lift Dynamic Tune: MITSUBISHI TRITON MQ/MRIf your Triton is used for recreational purposes and you want to improve its stance, ride and handling significantly, then our Forty20 suspension kit was created with you in mind. Up front is our Dynamic Tune strut/spring combination that'll get you around a 40mm...
- $2,530.00
- $2,530.00
- Unit price
- per
-
Loaded 4X4 40mm Lift Kit: MITSUBISHI TRITON MQ/MRThis lift kit is perfect for the 4X4 owner looking to upgrade the load carrying and towing ability of their 4X4 while gaining some handy additional body clearance when off-road. There's also the added advantage of improving the ride and handling of your 4X4,...
- From $2,410.00
- From $2,410.00
- Unit price
- per
-
Loaded 4X4 50mm Lift Kit: MITSUBISHI TRITON ML/MNThis lift kit is perfect for the 4X4 owner looking to upgrade the load carrying and towing ability of their 4X4 while gaining some handy additional body clearance when off-road. There's also the added advantage of improving the ride and handling of your 4X4,...
- From $2,310.00
- From $2,310.00
- Unit price
- per
-
Loaded 4X4 Standard+ Suspension Upgrade Kit: MITSUBISHI TRITON ML/MNYes, you can upgrade your Triton's suspension without lifting it much beyond stock heights! Our Standard+ kit includes two fully assembled front struts, with Lovells or Dobinson front coils and two rear shock absorbers. The factory rear leaf springs are retained. Expect around a...
- From $1,373.00
- From $1,373.00
- Unit price
- per
-
Loaded 4X4 Standard+ Suspension Upgrade Kit: MITSUBISHI TRITON MQ/MRYes, you can upgrade your Triton's suspension without lifting it much beyond stock heights! Our Standard+ lift kit includes two fully assembled front struts, with Lovells or Dobinson front coils, two rear shock absorbers and two rear leaf packs with fitting kits. Expect around...
- From $2,410.00
- From $2,410.00
- Unit price
- per
-
Bash Plates For Mitsubishi MQ & MR TritonThe only bash plate kit on the market for the MQ & MR Triton that addresses the following issues with these vehicles: Weak front mounts - This kit includes a bolt on front mount strengthening bracket. Cooling - This kit has more airflow built...
- From $535.00
- From $535.00
- Unit price
- per
-
Bash Plate Front Mount Strengthening Bracket - Mitsubishi Pajero Sport QE - QF And MQ - MR TritonThe Pajero Sport and Triton's weak factory bash plate mounts, where the first and second plates are attached, are notoriously weak and known to break simply by fitting thicker and more rigid bash plates. This bracket was designed as a key element of our...
- $99.00
- $99.00
- Unit price
- per
-
Front Bash Plate for Mitsubishi Triton MQ & MRThis front protection plate was designed as one element of our full UVP kits for both the Pajero Sport and the MQ/MR Triton, and due to popular demand, we've made it available as a standalone product. It is a replacement for the front factory...
- From $190.00
- From $190.00
- Unit price
- per
-
Transfer Case Protection Plate For Mitsubishi Triton MQ & MR (Auto Only)Most aftermarket bash plate kits offer little or no protection for the transfer case in the Tritons. This transfer case protection plate was designed as one element of our full UVP kits for both the Pajero Sport and the MQ/MR Triton, and due to...
- $170.00
- $170.00
- Unit price
- per
-
Pacemaker King Brown 3" Stainless Exhaust - Mitsubishi MQ And MR Triton 2.4L TD DPF Back SystemPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection. This system is a DPF back 3"...
- From $849.00
- From $849.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MQ & MR Single 3" System DPF Back with Muffler.Pacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection. This product listing is for a Pacemaker...
- $1,050.00
- $1,050.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton ML 3.2 TD Dual Cab 2006/2009 - Single 3" SystemPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,345.00
- $1,345.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton ML 3.2 TD Dual Cab 2006/2009 - Single 3" System Front Pipe Off Factory CATPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,266.00
- $1,266.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton ML 3.2 TD Dual Cab 2006/2009 - Single 3" System with CATPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,617.00
- $1,617.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton ML 3.2 TD Dual Cab 2006/2009 - Single 3" System with CAT and Rear Pipe Only OptionPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,506.00
- $1,506.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton ML 3.2 TD Dual Cab 2006/2009 - Single 3" System with Front Pipe Off Factory CAT and Rear Pipe Only Option .Pacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,156.00
- $1,156.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton ML 3.2 TD Dual Cab 2006/2009 - Single 3" System With Rear Pipe OnlyPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,234.00
- $1,234.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MN 2.5L TD Dual Cab 2008 to 2015 - Single 3" SystemPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,345.00
- $1,345.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MN 2.5L TD Dual Cab 2008 to 2015 - Single 3" System with CATPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,617.00
- $1,617.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MN 2.5L TD Dual Cab 2008 to 2015 - Single 3" System with CAT and Rear Pipe Only OptionPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,506.00
- $1,506.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MN 2.5L TD Dual Cab 2008 to 2015 - Single 3" System with Front Pipe Off Factory CATPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,266.00
- $1,266.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MN 2.5L TD Dual Cab 2008 to 2015 - Single 3" System with Front Pipe Off Factory CAT nd Rear Pipe Only OptionPacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,156.00
- $1,156.00
- Unit price
- per
-
Pacemaker | Mitsubishi Triton MN 2.5L TD Dual Cab 2008 to 2015 - Single 3" System with Rear Pipe Only Option .Pacemaker's King Brown range is specific to 4WD vehicles. Each system is mandrel bent and manufactured from 1.5mm wall thickness 409 Stainless Steel that is coated in a unique King Brown powder coat finish for added protection.This product listing is for a Pacemaker Mitsubishi...
- $1,234.00
- $1,234.00
- Unit price
- per
-
CV Driveshafts - Mitsubishi Triton MQDrivetech CV Driveshafts are a cost-effective option to the more expensive OEM driveshafts and are backed by a 3 Year/60,000km warranty, which is one of the best warranties in the industry. It is, however, important to understand the difference between a product defect and...
- From $195.00
- From $195.00
- Unit price
- per
-
Milford Ult1mate Next Gen Towbar to suit Mitsubishi Triton MQ/MR (05/2015 to Current) - REAR STEP fitted vehiclesAUSTRALIAN DESIGNED AND MANUFACTURED, USING AUSSIE STEEL! When it comes to towbars, the Milford Ult1mate Next Gen is as good as it gets. We've been running them on our MQ and MR Triton now for a couple of years and there just isn't another...
- From $772.00
- From $772.00
- Unit price
- per
-
Milford Ult1mate Next Gen Towbar to suit Mitsubishi Triton MQ/MR (05/2015 to Current) - NO REAR STEP vehiclesAUSTRALIAN DESIGNED AND MANUFACTURED, USING AUSSIE STEEL! When it comes to towbars, the Milford Ult1mate Next Gen is as good as it gets. We've been running them on our MQ and MR Triton now for a couple of years and there just isn't another...
- From $758.00
- From $758.00
- Unit price
- per
-
Milford Heavy Duty Towbar - Mitsubishi Triton No-Step Bumber and Cab-Chassis (11/2005 - Current)AUSTRALIAN DESIGNED AND MADE WITH AUSSIE STEEL! Designed and manufactured in Adelaide by Milford Industries. Milford has an enviable reputation for innovative design and quality craftsmanship and backs this product with a Lifetime Warranty. You can have the confidence of knowing that this product...
- From $635.00
- From $635.00
- Unit price
- per
-
Milford Heavy Duty Towbar - Mitsubishi Triton Rear Step Bumper (11/2014 - Current)AUSTRALIAN DESIGNED AND MADE WITH AUSSIE STEEL! Designed and manufactured in Adelaide by Milford Industries. Milford has an enviable reputation for innovative design and quality craftsmanship and backs this product with a Lifetime Warranty. You can have the confidence of knowing that this product...
- From $635.00
- From $635.00
- Unit price
- per
-
Milford Towbar Wiring Harness Kit - Mitsubishi Triton (05/2015 - 10/2018)Milford Towbar Wiring Harness Kit Milford design and develop vehicle-specific wiring harness kits right here in Australia. Every application is carefully considered and thoroughly tested so as to fully comply with all vehicle functions including Trailer Stability Programming (TSP), Lane Collision Avoidance systems, Park...
- $221.00
- $221.00
- Unit price
- per
-
Milford Towbar Wiring Harness Kit - Mitsubishi Triton (11/2018 - Current)Milford Towbar Wiring Harness Kit Milford design and develop vehicle-specific wiring harness kits right here in Australia. Every application is carefully considered and thoroughly tested so as to fully comply with all vehicle functions including Trailer Stability Programming (TSP), Lane Collision Avoidance systems, Park...
- $292.00
- $292.00
- Unit price
- per
-
Milford LoadMax Universal Roof Rack Support SystemMilford LoadMax Universal Roof Rack Support System Engineered with universal fitment in mind, the Milford LoadMax® is a complete internal cap support system designed to enable safe load management on just about every utility vehicle, cap, and roof rack combination on the market. Tested...
- $460.00
- $460.00
- Unit price
- per
-
CSA Monster 17x8 Alloy - 17X8 6/139.7 P25MONSTER is a tough 4x4 wheel, perfectly suited to the Australian market. Monster is finished in brilliant gloss black with machined spoke highlights, machined rim edge highlights and a huge deep lip. Given the huge success of the CSA Monster wheel in 16" sizes,...
- $325.00
- $325.00
- Unit price
- per
-
CSA Raptor Large Cap Satin Black Alloy - 16X8 6/139.7 P25RAPTOR is CSA's most popular wheel design and it's not hard to see why. Featuring a satin black finish, Raptor is available in sizes 16x8", 17x8", 18x8" and 20x8.5". Raptor is load rated to a maximum of 1250kg, except for the 16x8 wheel which...
- $290.00
- $290.00
- Unit price
- per
-
CSA Raptor Large Cap Satin Black Alloy - 17X8 6/139.7 P25RAPTOR is CSA's most popular wheel design and it's not hard to see why. Featuring a satin black finish, Raptor is available in sizes 16x8", 17x8", 18x8" and 20x8.5". Raptor is load rated to a maximum of 1250kg, except for the 16x8 wheel which...
- $310.00
- $310.00
- Unit price
- per
-
CSA Raptor Large Cap Satin Black Milled Alloy - 17X8 6/139.7 P25RAPTOR is CSA's most popular wheel design and it's not hard to see why. This version features a satin black finish with a milled face, and is available in size 17x8 in 25 Pos and 45 Pos. Raptor is load rated to a maximum...
- $345.00
- $345.00
- Unit price
- per
-
CSA Raptor Large Cap Bronze Alloy - 17X8 6/139.7 P35The best-selling RAPTOR is now available in a limited edition satin bronze paint finish. Bronze RAPTOR has a distinctive 8 spoke design with black rivets and a black cap.FREE shipping* We offer FREE shipping to business addresses or your nearest TNT depot in many...
- $310.00
- $310.00
- Unit price
- per
-
CSA Raptor Large Cap Satin Black Alloy - 17X8 6/139.7 P35RAPTOR is CSA's most popular wheel design and it's not hard to see why. Featuring a satin black finish, Raptor is available in sizes 16x8", 17x8", 18x8" and 20x8.5". Raptor is load rated to a maximum of 1250kg, except for the 16x8 wheel which...
- $310.00
- $310.00
- Unit price
- per
-
CSA Raptor Large Cap Satin Black Alloy - 18X8 6/139.7 P25RAPTOR is CSA's most popular wheel design and it's not hard to see why. Featuring a satin black finish, Raptor is available in sizes 16x8", 17x8", 18x8" and 20x8.5". Raptor is load rated to a maximum of 1250kg, except for the 16x8 wheel which...
- $330.00
- $330.00
- Unit price
- per
-
CSA Raptor Large Cap Satin Black Alloy - 18X8 6/139.7 P35RAPTOR is CSA's most popular wheel design and it's not hard to see why. Featuring a satin black finish, Raptor is available in sizes 16x8", 17x8", 18x8" and 20x8.5". Raptor is load rated to a maximum of 1250kg, except for the 16x8 wheel which...
- $330.00
- $330.00
- Unit price
- per
-
CSA Outlaw Large Cap Alloy - 16X8 6/139.7 P20OUTLAW is an aggressive looking 4x4 and SUV wheel in a traditional 5-spoke configuration. The five spokes are wide and strong and have sculptured features. The front face has an attractive, deep dish and is very easy to clean. Outlaw is finished in a...
- $285.00
- $285.00
- Unit price
- per
-
CSA Outlaw Large Cap Alloy - 17X8 6/139.7 P20OUTLAW is an aggressive looking 4x4 and SUV wheel in a traditional 5-spoke configuration. The five spokes are wide and strong and have sculptured features. The front face has an attractive, deep dish and is very easy to clean. Outlaw is finished in a...
- $310.00
- $310.00
- Unit price
- per
-
CSA Havoc Black Machined Face Dark Tint Alloy - 16X8 6/139.7 P20Havoc is a tough, 7-spoke wheel with a deep-dish design. The wheel features a machined face, finished off with a dark tint, to give the wheel a distinctive grey-metallic appearance. The quality cast bolts around the rim edge complete the tough appearance of the...
- $295.00
- $295.00
- Unit price
- per
-
CSA Havoc Black Machined Face Dark Tint Alloy - 17X9 6/139.7 P20Havoc is a tough, 7-spoke wheel with a deep-dish design. The wheel features a machined face, finished off with a dark tint, to give the wheel a distinctive grey-metallic appearance. The quality cast bolts around the rim edge complete the tough appearance of the...
- $340.00
- $340.00
- Unit price
- per
-
CSA Havoc Black Machined Face Dark Tint Alloy - 17X9 6/139.7 P35Havoc is a tough, 7-spoke wheel with a deep-dish design. The wheel features a machined face, finished off with a dark tint, to give the wheel a distinctive grey-metallic appearance. The quality cast bolts around the rim edge complete the tough appearance of the...
- $340.00
- $340.00
- Unit price
- per
-
CSA Havoc Black Machined Face Dark Tint Alloy - 18X9 6/139.7 P20Havoc is a tough, 7-spoke wheel with a deep-dish design. The wheel features a machined face, finished off with a dark tint, to give the wheel a distinctive grey-metallic appearance. The quality cast bolts around the rim edge complete the tough appearance of the...
- $370.00
- $370.00
- Unit price
- per
-
CSA Havoc Black Machined Face Dark Tint Alloy - 18X9 6/139.7 P35Havoc is a tough, 7-spoke wheel with a deep-dish design. The wheel features a machined face, finished off with a dark tint, to give the wheel a distinctive grey-metallic appearance. The quality cast bolts around the rim edge complete the tough appearance of the...
- $370.00
- $370.00
- Unit price
- per
-
CSA Bullet Satin Black Alloy - 16X8 6/139.7 P20Bullet is a bold 10-spoke wheel with an aggressive deep dish. Bullet features a satin black finish with tough chrome bolts. Available with an extended centre cap in zero offset fitments, Bullet can clear many large manual hubs. Bullet is available in 16x8, 17x9...
- $299.00
- $299.00
- Unit price
- per
-
CSA Bullet Satin Black Alloy - 16X8 6/139.7 P35Bullet is a bold 10-spoke wheel with an aggressive deep dish. Bullet features a satin black finish with tough chrome bolts. Available with an extended centre cap in zero offset fitments, Bullet can clear many large manual hubs. Bullet is available in 16x8, 17x9...
- $299.00
- $299.00
- Unit price
- per