These two movable holders securely clamp your surfboard in place vertically on either side of a Front Runner Slimline II Rack for easy transportation.
Adjust the holders along the length of the rack to accommodate various size boards.2 supplied Front Runner Stratchits hold the Surfboard snug against padded side rests.
The Stratchit straps clever cinching system provides easy-on and easy-off secure transport every time.
The vertical holders can be folded down and stored flat against the rack top. If space on the rack top is available, the holders can be used in their horizontal positions to mount a surfboard or other larger boards for SUP or windsurfing.
Each vertical holder and side rest has soft touch foam padding to cradle your valuable gear without harming or scratching the surfaces.
The Soft touch pads are made from weather-resistant cross-linked, closed-cell Polyethylene.
Included rubber pads provide further protection between your board and the Front Runner Stratchit straps.
The brackets are made from 3CR12 stainless steel and sealed with the same durable, weather-resistant black powder coating as the Front Runner Slimline II Roof Racks.
In the vertical position, the holders measure 400mm (15.8") high from the underside of the Slimline II Rack Tray.
When folded flat in the locked horizontal position the holders measure 45mm high from the underside of the Slimline II Rack Tray.
Can be used with Front Runner Slimline II Roof Racks, Bed Racks and Trailer Racks.
Easily bolts to your Slimline II Rack with supplied hardware.
Includes all necessary installation hardware and fitting instructions.
Consists of: 2 x Board Mounting Brackets 2 x Slimline II Rack Latch Brackets 1 x Pair of Stratchits 1 x Pair of Tie Down Rings Installation Hardware Fitting Instructions
Materials used: Black powder coated 3CR12 Stainless Steel 304 Stainless Steel Foam Pad Rubber
Product Dimensions: Outer Dimensions (Single Holder): 559mm (22") L x 85.5mm (3.4") W x 98.5mm (3.9") H
Open Dimensions (Single Holder): 161mm (6.3") L x 85.5mm (3.4") W x 445mm (17.5") H
COVID-19 has had massive impacts on the manufacturing industry, freight, and ironically, also spiked demand for many products that have experienced supply restrictions.
Most products are still available, but you should expect to have to wait for some products, that you might want, to come back into stock.
Unfortunately, it's just the way it is right now and it's unlikely to change for the foreseeable future.
Front Runner - Products that are in stock, in our experience, ship very promptly, usually within 24 hours, direct from Front Runner.
If the product is out of stock, we'll provide a pre-order option and if you proceed to pre-order, we'll set up an alert so that we can arrange purchase and shipping to you, as soon as the product is back in stock.
Out-of-stock products can take 1 to 4 weeks to come back into stock again, as a general rule.
Pacemaker King Brown Exhausts - Pacemaker's product is literally as good as it gets and since COVID-19 hit, they've been working flat out to keep up with demand, which means many of their systems aren't kept in stock right now.
We've set all of their systems to pre-order and we will order your exhaust as soon as your pre-order purchase is processed. Expect a 3-week wait for your system to be manufactured and then a few days for shipping.
If it happens to be in stock, your exhaust system will ship directly to you from Pacemaker, within 2 to 4 days, and yes, you might get lucky on this one as they are slowly catching up.
CSA Alloy Wheels - If the wheel you want is shown as in stock, it will ship directly to you from one of CSA's Australian warehouses, within 2 to 4 days.
If it's not in stock, but we know the next shipment is coming through, we'll set the product to pre-order. Pre-ordering means that CSA will reserve the wheels you purchase in the next stock delivery that they receive, effectively putting you up the front of the queue.
If you choose to pre-order, expect a 6 to 8-week wait, again, due to COVID 19 related freight disruptions for the most part.
Milford Products - Milford makes some products to keep in stock while others are made to order, and like many other manufacturers at the moment, it can be a battle to maintain the usual level of 'in stock' products.
If a product is in stock, it will ship directly to you from Milford in Adelaide within 2 to 4 days of your order being placed.
If a product isn't in stock, we'll provide a pre-order option on this site. Pre-ordering means that we'll place an order with Milford for your purchased product.
Allow 10 to14 days for it to be manufactured and then shipped to you from Adelaide.
If you have any questions regarding delivery timing, stock availability, or pre-ordering, let us know via ourcontact page.