LD-909980

Milford Weight Distribution Hitch 362kg/800lb

Free Shipping

Milford Weight Distribution Hitch

Towing heavy trailers and caravans can place undue pressure on a vehicle, particularly on the rear axle. If the weight is not properly distributed the rear of the car tends to sag, resulting in the front wheels losing contact with the road.

This loss in contact decreases steering control and braking ability, significantly impacting safety. The added stress also causes undue wear and tear on tyres, increases fuel consumption, misaligns headlights, and can cause trailers to sway – further impacting a vehicle’s performance and safety.

Installing a Weight Distribution Hitch provides support, helping to redistribute the weight more evenly across the vehicle and trailer axles.

The Milford Ultra Load Weight Distribution Hitch is designed and manufactured to alleviate the stress on the rear of the vehicle, resulting in a far safer towing experience.

With built-in features to ensure full weight distribution, hassle-free reversing, and quiet operation paired with a rugged and stylish powder coated finish the Milford Weight Distribution Hitch is the ultimate in correct load management.

When choosing a Weight Distribution Hitch it is important to match the weight category of the hitch to your towing needs. If the weight category is too low the hitch will apply inadequate force, which results in insufficient leveling.

Max capacity without spring bars - Ball 226kgs, Trailer 2267kgs.

Features

Superior Design HiLoad / Max Lift design promotes full weight distribution.

Parallel Mounted, the straight bar design results in maximum clearance and ‘Hassle Free’ reversing.

Rapid adjustment with super safe, easy-to-lock chain lift brackets and soft-grip handle.

Standard fit grease nipples to ensure quiet operation and reduced noise.

Comes fully assembled for rapid mount installation.

Australian Standard 50mm 3500KG Towball included (600lb & 800lb).

Rugged Powder Coat Finish.

Covered by Milford's Lifetime Warranty - requires registration

Warranty

Check out our warranty information page for more information.

Delivery

COVID-19 has had massive impacts on the manufacturing industry, freight, and ironically, also spiked demand for many products that have experienced supply restrictions.

Most products are still available, but you should expect to have to wait for some products, that you might want, to come back into stock.

Unfortunately, it's just the way it is right now and it's unlikely to change for the foreseeable future.

Front Runner - Products that are in stock, in our experience, ship very promptly, usually within 24 hours, direct from Front Runner.

If the product is out of stock, we'll provide a pre-order option and if you proceed to pre-order, we'll set up an alert so that we can arrange purchase and shipping to you, as soon as the product is back in stock.

Out-of-stock products can take 1 to 4 weeks to come back into stock again, as a general rule.

Pacemaker King Brown Exhausts - Pacemaker's product is literally as good as it gets and since COVID-19 hit, they've been working flat out to keep up with demand, which means many of their systems aren't kept in stock right now.

We've set all of their systems to pre-order and we will order your exhaust as soon as your pre-order purchase is processed. Expect a 3-week wait for your system to be manufactured and then a few days for shipping.

If it happens to be in stock, your exhaust system will ship directly to you from Pacemaker, within 2 to 4 days, and yes, you might get lucky on this one as they are slowly catching up.

CSA Alloy Wheels - If the wheel you want is shown as in stock, it will ship directly to you from one of CSA's Australian warehouses, within 2 to 4 days.

If it's not in stock, but we know the next shipment is coming through, we'll set the product to pre-order. Pre-ordering means that CSA will reserve the wheels you purchase in the next stock delivery that they receive, effectively putting you up the front of the queue.

If you choose to pre-order, expect a 6 to 8-week wait, again, due to COVID 19 related freight disruptions for the most part.

Milford Products - Milford makes some products to keep in stock while others are made to order, and like many other manufacturers at the moment, it can be a battle to maintain the usual level of 'in stock' products.

If a product is in stock, it will ship directly to you from Milford in Adelaide within 2 to 4 days of your order being placed.

If a product isn't in stock, we'll provide a pre-order option on this site. Pre-ordering means that we'll place an order with Milford for your purchased product.

Allow 10 to14 days for it to be manufactured and then shipped to you from Adelaide.

If you have any questions regarding delivery timing, stock availability, or pre-ordering, let us know via our contact page.

We know new 4X4s

Here's a couple of our recent video reviews. Steane and David have been reviewing the latest 4X4s for years, nearly as long as Brendan has been designing suspension for them!

Search