Jeep Wrangler JL 4 Door (2017-Current) Front Runner Extreme Roof Rack Kit
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JL 4 door including the Slimline II tray (1425mm x 2368mm), the Jeep Extreme Mounting System and a Wind Deflector.
Drilling is required for installation.
The JL Extreme mounting system bolts to existing mounting points on the body and factory roll bar. This unobtrusive, high-performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place.
The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails allow for a Front Runner under rack mount table (1 x smaller prep table or 1 x larger camp size table) to be fitted.
NOTE: This Kit cannot be used together with the soft-top roof or Sky One-Touch Power top.
All Front Runner Racks are backed by a Limited Lifetime Warranty.
1 x FAJL002 - Jeep Wrangler JL (2018-Current) Foot Rails - by Front Runner 1 x FAJL003 - Jeep Wrangler JL 4 Door (2018-Current) Inner Brackets - by Front Runner 1 x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount 1 x RRSTJ12 - Slimline II Tray - 1425mm(W) X 2368mm(L) - by Front Runner
Black epoxy powder-coated T6 aluminium 3CR12Stainless Steel
Approximate Installed Weight 39kg (86lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
COVID-19 has had massive impacts on the manufacturing industry, freight, and ironically, also spiked demand for many products that have experienced supply restrictions.
Most products are still available, but you should expect to have to wait for some products, that you might want, to come back into stock.
Unfortunately, it's just the way it is right now and it's unlikely to change for the foreseeable future.
Front Runner - Products that are in stock, in our experience, ship very promptly, usually within 24 hours, direct from Front Runner.
If the product is out of stock, we'll provide a pre-order option and if you proceed to pre-order, we'll set up an alert so that we can arrange purchase and shipping to you, as soon as the product is back in stock.
Out-of-stock products can take 1 to 4 weeks to come back into stock again, as a general rule.
Pacemaker King Brown Exhausts - Pacemaker's product is literally as good as it gets and since COVID-19 hit, they've been working flat out to keep up with demand, which means many of their systems aren't kept in stock right now.
We've set all of their systems to pre-order and we will order your exhaust as soon as your pre-order purchase is processed. Expect a 3-week wait for your system to be manufactured and then a few days for shipping.
If it happens to be in stock, your exhaust system will ship directly to you from Pacemaker, within 2 to 4 days, and yes, you might get lucky on this one as they are slowly catching up.
CSA Alloy Wheels - If the wheel you want is shown as in stock, it will ship directly to you from one of CSA's Australian warehouses, within 2 to 4 days.
If it's not in stock, but we know the next shipment is coming through, we'll set the product to pre-order. Pre-ordering means that CSA will reserve the wheels you purchase in the next stock delivery that they receive, effectively putting you up the front of the queue.
If you choose to pre-order, expect a 6 to 8-week wait, again, due to COVID 19 related freight disruptions for the most part.
Milford Products - Milford makes some products to keep in stock while others are made to order, and like many other manufacturers at the moment, it can be a battle to maintain the usual level of 'in stock' products.
If a product is in stock, it will ship directly to you from Milford in Adelaide within 2 to 4 days of your order being placed.
If a product isn't in stock, we'll provide a pre-order option on this site. Pre-ordering means that we'll place an order with Milford for your purchased product.
Allow 10 to14 days for it to be manufactured and then shipped to you from Adelaide.
If you have any questions regarding delivery timing, stock availability, or pre-ordering, let us know via ourcontact page.