Ford Ranger & Mazda BT-50 (2012-Current) Front Runner Load Bar Kit / Track AND Feet
A set of Load Bars with Track Mounted Feet is used to transport gear on the roof of your vehicle when there's no need for a full Front Runner Roof Rack.
This low profile, smaller footprint solution includes 250mm feet, 260mm feet, 2 x 1255mm Load Bars, 2 x Ford Ranger 1200mm tracks, 1 x 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.
These Load Bars are mounted to the vehicle's roof via a set of supplied Tracks and Track Mounted Feet.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
Uses the same strong, corrosion-free aluminium slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and durable, weather-resistant black powder-coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner 1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner 1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Black epoxy powder-coated T6 aluminium 3CR12Stainless Steel
Approximate Installed Weight 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicle's roof.
COVID-19 has had massive impacts on the manufacturing industry, freight, and ironically, also spiked demand for many products that have experienced supply restrictions.
Most products are still available, but you should expect to have to wait for some products, that you might want, to come back into stock.
Unfortunately, it's just the way it is right now and it's unlikely to change for the foreseeable future.
Front Runner - Products that are in stock, in our experience, ship very promptly, usually within 24 hours, direct from Front Runner.
If the product is out of stock, we'll provide a pre-order option and if you proceed to pre-order, we'll set up an alert so that we can arrange purchase and shipping to you, as soon as the product is back in stock.
Out-of-stock products can take 1 to 4 weeks to come back into stock again, as a general rule.
Pacemaker King Brown Exhausts - Pacemaker's product is literally as good as it gets and since COVID-19 hit, they've been working flat out to keep up with demand, which means many of their systems aren't kept in stock right now.
We've set all of their systems to pre-order and we will order your exhaust as soon as your pre-order purchase is processed. Expect a 3-week wait for your system to be manufactured and then a few days for shipping.
If it happens to be in stock, your exhaust system will ship directly to you from Pacemaker, within 2 to 4 days, and yes, you might get lucky on this one as they are slowly catching up.
CSA Alloy Wheels - If the wheel you want is shown as in stock, it will ship directly to you from one of CSA's Australian warehouses, within 2 to 4 days.
If it's not in stock, but we know the next shipment is coming through, we'll set the product to pre-order. Pre-ordering means that CSA will reserve the wheels you purchase in the next stock delivery that they receive, effectively putting you up the front of the queue.
If you choose to pre-order, expect a 6 to 8-week wait, again, due to COVID 19 related freight disruptions for the most part.
Milford Products - Milford makes some products to keep in stock while others are made to order, and like many other manufacturers at the moment, it can be a battle to maintain the usual level of 'in stock' products.
If a product is in stock, it will ship directly to you from Milford in Adelaide within 2 to 4 days of your order being placed.
If a product isn't in stock, we'll provide a pre-order option on this site. Pre-ordering means that we'll place an order with Milford for your purchased product.
Allow 10 to14 days for it to be manufactured and then shipped to you from Adelaide.
If you have any questions regarding delivery timing, stock availability, or pre-ordering, let us know via ourcontact page.