Free Shipping on Front Runner product orders over $1000

LD-KRXM002

Expedition Rail Kit - Full Perimeter - for 1475mm(W) Rack

Effortlessly convert your Slimline II Roof Rack to an expedition-style rack with rails.

This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1475mm wide Front Runner Slimline II Roof Rack.

Convert your Front Runner Slimline II Roof Rack at any time to a classic-looking safari-style basket-shaped roof rack.

Please note: this kit only works with 1475mm wide Front Runner Slimline II Roof Racks.

Install in minutes.

No drilling is required.

Adds extra cargo support.Attractive, low profile design.

Mounting hardware included.

Powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.

Manufactured with corrosion-resistant, high-density aluminium components.

The Expedition Rails add 61mm / 2.4” to the height of the roof rack.

The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a rooftop tent.

This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets.

NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts.

What's Included

Consists of:
2x RRAC069 - Expedition Tubing M (635.5mm and 570.5mm)
2x RRAC071 - Expedition Rail Corner Set
2x RRAC072 - Expedition Rail LH & RH Drop Set
3x RRAC073 - Expedition Rail Joiner
1x KRXX001 - Expedition Rail Middle Kit

Specifications

Materials used:
Powder-coated Aluminium die-cast joints
Powder-coated 304 Stainless Steel tubing

Product Dimensions:
Min: 752mm (29.6") - Max: 2772mm (109.1") L x 1475mm (58.1") W x 112mm (4.4") H

Weight:
8.62kg (19lbs)

Warranty

Check out our warranty information page for more information.

Delivery

COVID-19 has had massive impacts on the manufacturing industry, freight, and ironically, also spiked demand for many products that have experienced supply restrictions.

Most products are still available, but you should expect to have to wait for some products, that you might want, to come back into stock.

Unfortunately, it's just the way it is right now and it's unlikely to change for the foreseeable future.

Front Runner - Products that are in stock, in our experience, ship very promptly, usually within 24 hours, direct from Front Runner.

If the product is out of stock, we'll provide a pre-order option and if you proceed to pre-order, we'll set up an alert so that we can arrange purchase and shipping to you, as soon as the product is back in stock.

Out-of-stock products can take 1 to 4 weeks to come back into stock again, as a general rule.

Pacemaker King Brown Exhausts - Pacemaker's product is literally as good as it gets and since COVID-19 hit, they've been working flat out to keep up with demand, which means many of their systems aren't kept in stock right now.

We've set all of their systems to pre-order and we will order your exhaust as soon as your pre-order purchase is processed. Expect a 3-week wait for your system to be manufactured and then a few days for shipping.

If it happens to be in stock, your exhaust system will ship directly to you from Pacemaker, within 2 to 4 days, and yes, you might get lucky on this one as they are slowly catching up.

CSA Alloy Wheels - If the wheel you want is shown as in stock, it will ship directly to you from one of CSA's Australian warehouses, within 2 to 4 days.

If it's not in stock, but we know the next shipment is coming through, we'll set the product to pre-order. Pre-ordering means that CSA will reserve the wheels you purchase in the next stock delivery that they receive, effectively putting you up the front of the queue.

If you choose to pre-order, expect a 6 to 8-week wait, again, due to COVID 19 related freight disruptions for the most part.

Milford Products - Milford makes some products to keep in stock while others are made to order, and like many other manufacturers at the moment, it can be a battle to maintain the usual level of 'in stock' products.

If a product is in stock, it will ship directly to you from Milford in Adelaide within 2 to 4 days of your order being placed.

If a product isn't in stock, we'll provide a pre-order option on this site. Pre-ordering means that we'll place an order with Milford for your purchased product.

Allow 10 to14 days for it to be manufactured and then shipped to you from Adelaide.

If you have any questions regarding delivery timing, stock availability, or pre-ordering, let us know via our contact page.

We know new 4X4s

Here's a couple of our recent video reviews. Steane and David have been reviewing the latest 4X4s for years, nearly as long as Brendan has been designing suspension for them!

Search